MINIIZ-20 Basic Tramlining

MINIIZ-20 Basic Tramlining

Tramlining System

It is used for tramlining control of transmission box type universal seed drills. Up to 9 tramline can be defined in the system. Row increase and tramlining can be done manually or automatically according to different versions. The user is warned by LEDs about errors encountered in automatic tramlining versions. Easy and fast installation with Can-Bus technology.

System Components

Main Device
Intermediate Cable
Inductive Sensor
Spiral Driver
Power Cable – Intermediate Cable
Actuator Driver
5 point MIC Auto Connector Converter Adaptor
Marker Cable – 2m
Marker Cable – 4m

MİNİİZ – 20 – CANBUS - V1

  1. ANCAN-19V1-MIZ         x 1
  2. MIZ-19-AK-V1                x 1

MİNİİZ – 20 – CANBUS - V2

  1. ANCAN-19V1-MIZ            x 1
  2. INTCAB-CAN-19-V4-MIZ x 1
  3. AKTDRV-19-CAN-V1 veya BOBDRV-19-CAN-V1 x 1
  4. MNGDRV-19V1             x 1
  5. ESCAN-35-19V1 x 1

MİNİİZ – 20 – CANBUS - V3

  1. ANCAN-19V1-MIZ                                    x 1
  2. INTCAB-CAN-19-V4-MIZ x 1
  3. AKTDRV-19-CAN-V1 veya BOBDRV-19-CAN-V1 x 1
  4. MNGDRV -19V1 x 1
  5. ESCAN-35-19V1 x 2

MİNİİZ – 20 – CANBUS - V4 BİLEŞENLERİ

  1. ANCAN-19V1-MIZ                                    x 1
  2. INTCAB-CAN-19-V4-MIZ x 1
  3. AKTDRV-19-CAN-V1 veya BOBDRV-19-CAN-V1 x 1
  4. MNGDRV -19V1 x 1
  5. ESCAN-35-19V1 x 3
  6. UZT-MINI-19-V2 x 1

MINIIZ – 20 – CANBUS - V1 :

  • Diplays in which row the tractor is currently in and which row to tramline.
  • When the tractor is in the row to tramline (the left and right digits on the screen are equalized), it warns the user by LED to tramline manually.

MINIIZ – 20 – CANBUS – V2 :

  • Diplays in which row the tractor is currently in and which row to tramline.
  • The row increment is done manually by the user.
  • When the tractor is in the row to tramline (the left and right digits on the screen are equalized), automatically tramlines.
  • According to the values entered, it gives warning by LED if any problem occurs while tramlining (when tramlining is not done although the tractor is in the row to tramline set before or when the tramlining is done although the tractor is not in the row to tramline set before).

MINIIZ – 20 – CANBUS – V3 :

  • Diplays in which row the tractor is currently in and which row to tramline.
  • The row increment is done automatically according to the signal from marker.
  • When the tractor is in the row to tramline (the left and right digits on the screen are equalized), automatically tramlines.
  • According to the values entered, it gives warning by LED if any problem occurs while tramlining (when tramlining is not done although the tractor is in the row to tramline set before or when the tramlining is done although the tractor is not in the row to tramline set before).

MINIIZ – 20 – CANBUS – V4 :

  • Diplays in which row the tractor is currently in and which row to tramline.
  • At the end of each row, it will automatically increase the number of the row you are in. In this version, the device performs the sequence tramlining itself with the information coming from two markers. For example; when the information from the marker increases with the tramlining information, it does not increase the number of row again without the signal coming from the other marker. Thus, eliminates errors.
  • When the tractor is in the row to tramline (the left and right digits on the screen are equalized), automatically tramlines.
  • The warning LED informs you of the fault status associated with tramlining.